FREE SHIPPING on all USA orders over $60 |
||||||
|
The CDM
Gear MOD-C light mount is a superior, light weight clamp
(weighs only 1.8oz), small and compact enough to reduce
your shotgun profile so it reduces hang ups and snags. Spaced between the
barrel and magazine tube it will not block your parallel peripheral sight
picture. Manufactured from 6061-T6 aluminum and hard coat anodized,
it will not crack, break or shrink over time like plastic mounts. One tool
for one bolt is all that is needed to attach and remove this clamp in seconds.
Holds lights from .980" to 1.032" and comes with all wrenches
and 3M polyurethane no slip grip pads to protect your finish. Includes a
built in non rotational sling swivel cup for QD PB sling swivels.CDM Gear
offers a factory look with a low profile that doesn't need to be removed
when stowed in a case or riding in a gun rack. The design makes for a cleaner
look with less snags to worry about, giving you professional control of your
weapon. With illumination and targeting systems getting smaller, lighter
and more compact, we're moving with the industry, law enforcement and the
military to provide a superior mounting platform that provides for a stronger,
less complicated attachment for your weapon. Fits 12 ga. shotguns with 1"
of space on a 1" magazine tube. Fits Remington 870, 1100, 1187, Benelli
M1/M2/M4/M104 (not SuperNova), Mossberg 500 7 shot, 590 (not the 590A1 or
SPX models, see MTC clamp), Winchester 1300, 1200 and SXP Defender.
|
|||||
|
The CDM Gear
BMT mount light mount with 3 slot rail
for 12 gage shotguns holds the light between the barrel and magazine
tube for fingertip actuation of lights on either the left or right side of
the shotgun. It can use optional 5 slot or 3 slot rails for mounting additional
lighting or a laser on the other side. One tool for one bolt is all that
is needed to attach and remove this clamp in seconds. Comes with
all wrenches and 3M polyurethane no slip grip pads to protect your finish.
Includes a built in non rotational sling swivel cup for QD PB sling swivels.
With illumination and targeting systems getting smaller, lighter and more
compact, we're moving with the industry, law enforcement and the military
to provide a superior mounting platform that provides for a stronger, lighter,
less complicated attachment for your weapon. Fits 12 ga. shotguns with 1"
of space on a 1" magazine tube. Fits Remington 870, 1100, 1187, Benelli
M1/M2/M4/M104 (not SuperNova), Mossberg 500 7 shot, 590 (not the 590A1 or
SPX models, see BMTA1 clamp), Winchester 1300, 1200 and SXP Defender.
|
|||||
BMTA1
|
For Mossberg 590A1 and
Mossberg 903SPX shotguns
The CDM Gear BMTA1 light mount with 3 slot rail holds the light between the barrel and magazine tube for fingertip actuation of lights on either the left or right side of the shotgun. It can use optional 5 slot or 3 slot rails for mounting additional lighting or a laser on the other side. One tool for one bolt is all that is needed to attach and remove this clamp in seconds. Comes with all wrenches and 3M polyurethane no slip grip pads to protect your finish. Includes a built in non rotational sling swivel cup for QD PB sling swivels. With illumination and targeting systems getting smaller, lighter and more compact, we're moving with the industry, law enforcement and the military to provide a superior mounting platform that provides for a stronger, lighter, less complicated attachment for your weapon. Fits Mossberg 590A1 and Mossberg 930 SPX with 1" diameter magazine tube.
|
|||||
|
The CDM Gear BMT
Clamp for Remington 12 gage shotgun extentions is a simple, single
clamp for aligning and holding your magazine tube in place. One tool for
one bolt is all that is needed to attach and remove this clamp in seconds.
Comes with all wrenches and 3M polyurethane no slip grip pads to protect
your finish. Includes a built in non rotational sling swivel cup for QD PB
sling swivels. Fits Remington 870, 1100, 1187.
|
|||||
|
The BMT magazine clamp
for 12 gage shotguns weighs only 1.5oz. and is lighter than the
factory Remington stamped steel clamp that comes on the Remington 870 with
an extended magazine tube. You can mount a variety of rails and sling mount
systems on this clamp. It can use optional 5 slot or 3 slot rails to put
the light and clamp exactly where you need it. One tool for one bolt is all
that is needed to attach and remove this clamp in seconds. Comes with
all wrenches and 3M polyurethane no slip grip pads to protect your finish.
Includes a built in non rotational sling swivel cup for QD PB sling swivels.
With illumination and targeting systems getting smaller, lighter and more
compact, we're moving with the industry, law enforcement and the military
to provide a superior mounting platform that provides for a stronger, less
complicated attachment for your weapon.Fits 12 ga. shotguns with 1" of space
on a 1" magazine tube. Fits Remington 870, 1100, 1187, Benelli M1/M2/M4/M104
(not SuperNova), Mossberg 500 7 shot, 590 (not the 590A1 or SPX models, see
MTC clamp), Winchester 1300, 1200 and SXP Defender.
|
|||||
20 GAGE REM 870
|
The CDM Gear BMT mount
light mount with or without 3 slot rail for 20 gage shotguns
holds the light between the barrel and magazine tube for fingertip actuation
of lights on either the left or right side of the shotgun. It can use optional
3 slot rails for mounting additional lighting or a laser on the other side.
One tool for one bolt is all that is needed to attach and remove this clamp
in seconds. Comes with all wrenches and 3M polyurethane no slip grip
pads to protect your finish. Includes a built in non rotational sling swivel
cup for QD PB sling swivels. Fits 20 ga. shotguns with 1" of space on a
.875" magazine tube. Fits Remington
870 20ga. with serial number suffix of P, K & U. Your serial number will
look like this example: 0000000(P,K or U). This will not fit the older Remington
20ga. with serial number suffix X or N.
|
|||||
|
The MTC is the latest
offering in the MT series of clamps for 1" lights giving you more for your
money. This 2oz. clamp fits in a 1/2" of space so it is perfect for the Mossberg
590A1 and just about any other shotgun with a 25mm magazine tube and room
to mount it. This mount can be positioned 2 ways, left or right, and provides
a solid "lock up" around the mag tube. Each position allows for a sling
to be used with the included sling mount/hand stop. Additionally there is
provision for a QD push button sling swivel. Manufacturered from aircraft
grade aluminum and hard coat anodized it is a superior mounting solution
for those with limited space or under the gun mounting requirements. One
tool for one bolt is all that is needed to attach and remove the clamp or
light in seconds. Fits Mossberg 590A1 Heavy Millspec Barrel and Ithaca Shotgun
Magazine Tubes. Not meant for magazine extensions without a clamp. FITS: Mossberg 500, 535, 590, 590A1. Not for use with heat shield without modification in some cases.Will not fit Nordic Components magazine tube.
|
|||||
|
The
MTR with included 3 slot rail is the latest offering
in the MT series of clamps for lights with built in attachment points.
This 1.7oz clamp fits in a 1/2" of space so it is perfect for the Mossberg
500 or 590A1 and just about any other shotgun with a 25mm magazine tube and
room to mount it. This mount can be positioned 2 ways, left, or right, and
provides a solid "lock up" around the mag tube. Each position allows for
a sling to be used on one side or the bottom. Manufacturered from aircraft
grade aluminum and hard coat anodized it is a superior mounting solution
for those with limited space or under the gun sling mounting requirements.
One tool for one bolt is all that is needed to attach and remove the clamp
or light in seconds. Fits Mossberg 590A1 Heavy Millspec Barrel and Ithaca
Shotgun Magazine Tubes. Not meant for magazine extensions without a clamp.
WILL NOT FIT MOSSBERG SHOCKWAVE. se the MTRS! FITS: Mossberg 500, 535, 590, 590A1. Not for use with heat shield without modification in some cases.Will not fit Nordic Components magazine tube.
|
|||||
For MOSSBERG 590
SHOCKWAVE |
The MTRS with included
3 slot rail is the latest offering in the MT series of clamps for lights
with built in attachment points. This 1.7oz clamp fits in the
small space of the Mossberg 590 SHOCKWAVE. This mount can be positioned
2 ways, left, or right, and provides a solid "lock up" around the mag tube.
This mount can be positioned 2 ways, left, or right, and provides a solid
"lock up" around the mag tube. Each position allows for a sling to be used
on one side or the bottom. . Manufacturered from aircraft grade aluminum
and hard coat anodized it is a superior mounting solution for those with
limited space or under the gun sling mounting requirements. One tool for
one bolt is all that is needed to attach and remove the clamp or light in
seconds. FITS: Mossberg 590 SHOCKWAVE. Not for use with heat shield without modification in some cases.Will not fit Nordic Components magazine tube.
|
|||||
20 GAGE REM
870 |
The UL Series of shotgun light mounts are machined from solid 6061-T6
aluminum billet and hard anodized to a Mil Std. Type III hard coat finish.
This is a "NO TOOLS" mount and we designed this mount for added strength
by incorporating a way to use the barrel lug as an additional support reducing
all rotational movement of the light mount. The UL series will be available
in a 1" light version currently. This mount can not be used with a magazine
tube extension unless the extention is clamped. This mount does not
have a ball detent and requires the Remington factory magazine tube cap retention
device that is mounted on the end of the magazine tube spring to operate
correctly. NOTE: The fore end may require some sanding to assure a
proper fit.
|
|||||
20 GAGE MOSSBERG
500 |
The UL Series of shotgun light mounts are machined from solid 6061-T6
aluminum billet and hard anodized to a Mil Std. Type III hard coat finish.
This is a "NO TOOLS" mount and we designed this mount for added strength
by incorporating a way to use the barrel lug as an additional support reducing
all rotational movement of the light mount. The UL series will be available
in a 1" light version currently. This mount uses the factory ball detent
in the bolt. This mount requires the removal of the barrel bolt retaining
clip so the bolt comes free fro the barrel lug. Fits Mossberg 500 20ga.
only.
|
|||||
Mossberg 500 20 & 12
gage. |
The HS2012 mounts on the factory metal heatshield of the Mossberg
500 12ga. and 20ga. heat shields. The way heat shields are mounted there
is no real room for a traditional light mount, so we used what was available.
Now you can mount a 3 slot rail directly onto your heatshield. We also include
a special grippy pad to place inside the heatshield to aide in the reduction
of rotation during firing. Comes with zinc plated locking nuts, bolts, allen
wrench, special grippy pad and 3 slot rail made to fit the factory Mossberg
heatshield and components.
|
|||||
BC47 series AK47
mount |
THE BC-47 series of light mounts is designed for the .592" barrel size
between the gas block and lower hand guard of AK47 rifles such as the WASR
10/63 and other Romanian variants. Made in the USA from 6061-T6 aluminum
and hard coat anodized for durability. This mounts at the gas block and should
fit under the gas tube easily. These mounts also allow you to leave your
factory cleaning rob in place. Choose from 2 stlyes.
1. BC47-1 is a lower mounting unit. This will leave your sling mount free while providing easy access to the button of you tactical light. 2. BC47-1 is a upper mounting unit. This will also leave your sling mount free while providing access to the button of your tactical light. Both mounts should approximate either a high or low mount on an AR15 for location.
|
|||||
