Home     Shotgun Light Mounts    Rifle Light Mounts    Safeties   Accessories   FAQ   Videos  


Home >> Shotgun Light Mounts >> ROC-12 series Light Mount

     The CDM Gear ROC-12 series of light mounts is a US made railed barrel clamp that is used to support factory and aftermarket 1" diameter magazine tubes, and extensions, while providing low profile mounting rails on the left and right side for rail mountable lights and acessories.

     The rail and clamp half are manufactured as one piece from aluminum and precision CNC machined to size. All threaded holes are press formed into the mount for hardness. The entire mount is then machine finished to soften round edges before we type III mil spec hard coat anodized for durability.

       Fingers at the top of the clamp allow for use with a barrel rib and/or compensation ports, as well as slight barrel taper, while a solid surface on the bottom accepts our 3M no slip grip pads to reduce movement under recoil.

     Just 2 socket head cap screws work opposite each other to hold the clamp in place and are included along with a wrench and our 3M no slip grip pads for the magazine tube. The mount requires 1 1/2" of mounting surface without interference from a heat shield. Will not work with heavy walled barrels or magazine tubes larger than 1".

The CDM Gear ROC-12 is our base barrel clamp that is used to support factory and aftermarket 1" diameter magazine tubes, and extensions, while providing mounting rails on the left and right side for rail mountable lights and acessories.

ROC-12

MSRP $39.95

The CDM Gear ROC-12S is the same as above only it includes a limited rotation docking point for a PBQD sling swivel. (sling swivel not included)

ROC-12S

MSRP $44.95

The CDM Gear ROC-12R  is the same as the ROC-12 only the ROC-12R uses our patented ring and curved rail design, using a flashlight ring mount  (included) to draw tight a 1" round bodied tac light into the curved portion of the rail to locate the light. This mount gives you the choice of using either a round bodied tac light or a rail mountable light/laser, or both! 

ROC-12R

MSRP $49.95

Includes all screws, an allen wrench and appropriate 3M no slip grip pads.

     Fits Remington 870, 1100, 1187, Benelli M1/M2/M4/M104, Mossberg 500 7 shot, 590, Winchester 1200, 1300, SXP. Fits 12 ga. shotguns with 1" of space on a 1" magazine tube. Will not work on Benelli M3, SuperNova, Mossberg 590A1 or 930 SPX.

NOTE:(will not fit Nordic Components or larger magazine tubes). Sling swivel, light or other accessories are not included.